|
|
Item Posts
Sort Order
|
|
|
Want to power up my stock yfz450
|
|
Posted: 09/02/09
12:34 PM
|
|
Wolf1,
Was thinking about putting a power kit on my 06 YFZ450. It is stock now with no mods. What Kind of pipe would you suggest I go with? I just want more all around power, maybe with a little better low end. I haven't really researched any yet, so I don't know what to stay away from. Any advice you can provide would be really appreciated. Thanks.
|
|
|
|
wolf1
Addict
| Posts: 2234
| Joined: 11/07
Posted: 09/03/09
07:08 PM
|
|
yoshimura works really well, though a little pickier to jet the carb right.
Keep it RUBBER SIDE DOWN!!
|
|
|
|
|
Posted: 09/14/09
05:25 PM
|
|
Thanks. Am I going to have trouble finding someone locally that will be able to jet it well? And I know you don't probably know who is in my area, but what I guess I mean is will it be hard to find someone who will get it right or should anyone at my local yamaha service center going to be able to do it?
|
|
|
|
|
|
|
Posted: 09/20/09
10:29 AM
|
|
If you are going to upgrade pipe you should do header & pipe. also hi flow air cleaner & remove air lid for flow. jet carb to compensate for air flow. tuned properly, you should get the results you are looking for
08/ Raptor 700 SE.
Fuel Pac tuner GYTR intake GYTR Header & Pipe, full skids
|
|
|
|
FmxLevi
Enthusiast
| Posts: 392
| Joined: 11/08
Posted: 09/20/09
10:46 AM
|
|
a yosh pipe will definetly do it for you. top of the line, as for getting it jetted. your local dealer should be able to do it. depending on if they are a reasonable, trust worthy shop, or the kinda shop that will charge you to fix the problem, then you gotta bring it back because the either didnt fix it or screwed something up in the process!
-
2005 honda trx450 golden west graphics, hot cam, high compression piston, hmf exhaust, nerf bars,works shocks, golden west seat cover, one industries bars, and more
|
|
|
|
|
|
|