|
|
Item Posts
Sort Order
|
|
|
2007 400 fis electrical issue
|
merwin10
New User
| Posts: 7
| Joined: 07/09
Posted: 07/09/09
12:26 PM
|
|
Hi All -
Had the battery replaced and since then the digital instrument cluster has not worked. Checked all fuses, diodes, checked that voltage was on both sides of fuses, checked harness for rubs, checked grounds and power at cluster and cdi, ok!
What happens is when the ignition switch is in the run position the red back-lighting comes on the cluster but nothing else. It use to show shift position and 00 MPH, battery voltage, fuel, and time. Now it does nothing!
Pushed the reset button nothing! Disconnected the battery and let sit to try and reset the cluster reconnected nothing!
Any ideas how to get the digital cluster to display again!
ATV runs fine and everything else works! Just no indications of rpm/mph fuel oil time or anything! Just a blank red LCD screen!
Any magic rest tool or plug?
Any help would be appreciated.
Mike - 
|
|
|
|
|
|
|
|
|