|
|
Item Posts
Sort Order
|
|
|
toa toa 110cc quad automatic
|
|
Posted: 02/16/09
02:05 PM
|
|
hey guys,anyone know what the adjustment is from factory on then side case screw for the trans.located center of lower case right side has slot bolt and nut retainer,any help would be great,i messed with it and forgot the original setting,dont know if i scewed up o  r not.thanks.
|
|
|
|
wolf1
Addict
| Posts: 2244
| Joined: 11/07
Posted: 02/16/09
05:25 PM
|
|
original is wherever it doesn't slip or doesn't disengage.
i believe if i remember correctly, turning it to the right increases the play and turning it left decreases the play.;
Keep it RUBBER SIDE DOWN!!
|
|
|
|
|
Posted: 02/17/09
07:02 AM
|
|
CLUTCH ADJUSTMENT FOR 50-125cc CHINESE ATVS, (automatic-semiautomatic)
on the right side of the engine their's a stud and a locknut, depending on the manufature it may be exposed or under a oval cover with 2 8mm bolt heads holding the cover on, remove cover or if it's exposed then loosen lock nut while holding the stud with a slotted screw driver, take a slotted screw driver and rotate the stud counterclock wise until resistance is felt, once felt then back off stud 1/8 turn, while holding the stud with the screw driver tighten the locknut, thats all their is to it, if this doesn't fix the clutch issure then replace clutch
07 prowler
|
|
|
|
|
|
|
Posted: 02/19/09
10:29 PM
|
|
thanks for the info i appreciate it .
|
|
|
|
|
|
|