Yamaha Bear Tracker 250 Neutral indicator light

Hi,

When I try to start my machine, the green neutral light does not light up and the starter will not turn over. Almost like its something electrical. The red reverse light works as well as the head lights. The machine starts fine with pull start. Any replies would be great  

try jiggleing the shifter to see if its in (n) also check linkage for anything unussually loose or something to that effect.other than that good luck about all i got  

Thanks for the reply. Its has to be something electrical.  

Check on the bottom of the trans, there is a wire that runs down there for the neutral indicator.  It's pretty much straight in and down from the shifter.  On mine the connection was loose and wouldn't turn the light on some of the time.  I crimped the connector down a little tighter and haven't had and problems since.  

Thanks for the advise. I'll give it a try. If that doesn"t work, then its off to the shop.  

That was the problem. Thank you very much. Starts right up with electric start.

TC