ATV Rider Online Homepage ATV Rider
Share This Share This Num Posts    Sort Order
need help with trailboss 250  
killdux
New User | Posts: 5 | Joined: 09/08
Posted: 09/13/08
02:46 PM

:confuse friend and have ran into a stumper. The bike is a 85-88 model, it has 120 psi of compression and holds it pretty long so i know the seals appear good in the bottom end. It has 2 gallons of new premium gas in tank and good on oil and a brand new plug i got at the dealer. my problem is that it will only run on ether and not the gas  and it seems to crank along d:  I am working on a trailboss 250 r/es for atime to start and run at all. Any info?  


 
wolf1
Guru | Posts: 1069 | Joined: 11/07
Posted: 09/14/08
06:02 AM

carb could be clogged.
the compression is low, the trailboss 250cc should be getting around 130 psi.

but if it is starting with ether, then chances are you have a clogged carb, and it isn't getting fuel through the carb.

try removing the carb and cleaning out any fuel gum and use either a wire bread tie with the plastic coating removed or using a .10 guitar string to run through the jets to make sure they are clean and clear.
if no luck there check the fuel tank shut off valve for trash or debris.  


 
  • RSS Feed
    • Add to My Yahoo!
    • Add to Google
    • Subscribe on Bloglines
    • Subscribe on NewsGator
    • MyMSN
    • My AOL
    • Add to NetVibes
    • Add to Rojo
    • Add to NEWSBURST
    • Add to Technorati
    SUBSCRIBE TO OUR FORUMS