ATV Rider Online Homepage ATV Rider
Share This Share This Num Posts    Sort Order
2001 Blaster stalls after riding for about an hour wont restart  
blastersteve
New User | Posts: 2 | Joined: 08/08
Posted: 08/20/08
07:54 AM

Whats wrong with my Blaster any ideas? wont run after hot and wont restart until it cools down.  


 
wolf1
Guru | Posts: 1069 | Joined: 11/07
Posted: 08/23/08
04:40 PM

could a few different things.

first have you tried replacing the spark plug?

if so and you still have the same problem, then i would check the reeds you may possibly have a broken reed.

since the blaster doesn't have valves or a timing chain it's a little simpler to diagnose but sometimes it's a little hard on here to properly diagnose without all of the information.

before it gets hot does it cut out or bog down at all?

are there any unusual noises coming from the engine?

there are more extreme possibilities, but without more information it would be a shot in the dark.

it could be as simple as the over-rev switch is bad and kills the engine once the engine gets hot.

when you figure with 2 cycle it takes 1 minute to burn the buildup off the plug and then another minute to warm the engine it kinda makes sense.
however if you unplug the tors unit you will definately have to retune the carb.

If you are close to the chattanooga area, bring it by my shop and I'll be happy to try to help you out with it.

Ray
Wolf Performance  


 
blastersteve
New User | Posts: 2 | Joined: 08/08
Posted: 08/25/08
02:04 PM

Got problem  fixed sold that one and got me a new Blaster THANKS  


 
  • RSS Feed
    • Add to My Yahoo!
    • Add to Google
    • Subscribe on Bloglines
    • Subscribe on NewsGator
    • MyMSN
    • My AOL
    • Add to NetVibes
    • Add to Rojo
    • Add to NEWSBURST
    • Add to Technorati
    SUBSCRIBE TO OUR FORUMS