ATV Rider Online Homepage ATV Rider
Share This Share This Num Posts    Sort Order
TAOTAO 100 Help!!  
Dosster
New User | Posts: 1 | Joined: 07/08
Posted: 07/30/08
04:49 PM

Hello


I bought a TaoTao 100 quad for my kids. I did the first oil change and mistakenly took off the wrong plug on the bottom. I think it was for the clutch? Any ways There was a spring and a Rod that came flying out.  Can someone give me the order that they go back in

1. Rod with tapered plastic cap on end.
2. Spring with tapered end.

Thanks in advance for the Help    


 
blainep
New User | Posts: 1 | Joined: 08/08
Posted: 08/15/08
05:22 PM

BEFORE I KNEW BETTER I BOUGHT MY GRANDSON A TAO TAO 110CC ATV FROM POWERSPORTSMAX.COM. THE POOR EXCUSE FOR A MANUAL SAYS TO SEE FIG. 5 TO KNOW WHERE TO ADD/DRAIN OIL. - THERE IS NO FIG. 5 OR 4 OR 6.
I CANT'T FIND ANY DIPSTICK THAT IS APPARANTLY SUPPOSED TO BE THERE, ONLY A SCREW-IN PLUG WITH A NOTCH IN IT BUT IT APPEARS TO BE ON THE TRANSMISSION.
CAN ANYONE TELL ME WHER TO ADD/DRAIN ENGINE AND TRANSMISSION OIL (IF IT HAS TRANSMISSION FLUID.

THANKS  


 
billl2099
User | Posts: 93 | Joined: 04/08
Posted: 08/16/08
05:31 AM

dosster
thats the cam chain tensioner, cap goes on top of rod, spring goes inside of rod with the tappered tip going inside the rod first. then just reinstall it, no harm no foul.

blainep

the engine and transmission shares the same engine oil, this is true with all 50-125 chinese atv's, doesn't matter if they are automatic, semiauto or manual
the dip stick should be on the right side of the engine, towards the back and has a chrome cap on it. the oil drain plug on the bottom is also on the bottom right side,17mm, not the 14mm on the left side. if you need anymore information e-mail me luvmysxs@yahoo.com  


07 prowler
2 hi bird qh110st

 
  • RSS Feed
    • Add to My Yahoo!
    • Add to Google
    • Subscribe on Bloglines
    • Subscribe on NewsGator
    • MyMSN
    • My AOL
    • Add to NetVibes
    • Add to Rojo
    • Add to NEWSBURST
    • Add to Technorati
    SUBSCRIBE TO OUR FORUMS