|
Num Posts
Sort Order
|
|
Posted: 07/19/08
03:55 PM
|
|
Hello riders
My 2005 Bruin 350 4X4 is blowing the 30A fuse when the key is turned on at what I asume is the starter solinoid/30A fuse block good continuity from ignition key switch to solinoid, 12.5 volts at fuse. Asuming bad solinoid? Any sugestions?
Thanks
|
wolf1
Guru
| Posts: 1069
| Joined: 11/07
Posted: 07/19/08
04:50 PM
|
|
quite possibly yes, will the starter turn over at all?
check to make sure the starter isn't shorted out.
|
|
Posted: 07/20/08
01:09 PM
|
|
Ok able to get the starter to turn over by jumping the solinoid with a screwdriver. Checked and cleaned all wireing harness conecters found bad conections at drive netural lights and repaired still blowing fuses,has to be a short somewhere just don't know where else to look.
|
|
|
|
Posted: 07/20/08
03:49 PM
|
|
After a weekend of grief and BS long story "short".......
TAIL LIGHT SHORT, disconected, problem solved!!!
At least I know that all of my conections are good now.
Last question, why in the hell does an off road ATV have a tail light anyway?
Happy trails,
GUNFIGHTER
|