how to get in to wolf1's readers rides to check schematics  

From the "forums" main page:

Look near the top under the ATVRiderOnline banner.  In red text you'll see "Forums | Blogs | Readers Rides".  Click on Readers Rides.

In the "Search" box in the upper right type "Wolf1", then click the "Go" button.

Two Thumbmail pic's will come up.  Click on the "1993" Yamaha Blaster picture.

Four more thumbnail pictures will show up.  One of those is the schematic you are after.  Click on it to expand it.  It still is pretty poor resolution, but it is better than nothing.

Right click on the picture, then select save picture as... {etc}  

Ok a little help i have a clone honda 110cc and we cleaned the carb we have a spark (new plug) wiring is all good, battery is good, we have a spark the cynlinder is getting fuel and its turning over but theres no "fire" and it wont start (but turns over). A little help please?  

Compression check is next.

Have you checked the valve clearance?  This needs to be adjusted periodically.  They tighten up with wear, and hard starting and/or no starting when cold is the classic symptom.  

yep you need to do a valve adjustment, 90% chance this will fix your problem, if you need instructions, send me a  request luvmysxs@yahoo.com  

i have a question i have a brand new 110cc chinese fourwheeler, that has never started from get go. got a new battery, new starter, traced the wiring to make sure nothing was grounded out. got fuel in it, got compression, got spark, just will not start. also the engine is wanting to turn over very slow?? any ideas or suggestions, we are usually pretty good at working with these small engines, but wolf1 help me out!  

I am having the same issues with my 125cc atv tao. Have you ever got yours started  

Do you know how much clearance ill send a message. i would be very happy to get it running. thx.  

You said you have spark but no fire. Is the spark plug sparking  

i live in cleveland right above you what your rates to work on one and how will i get it to you to fix?  

Just to let everyone know i just found what seems to be a pretty good website to find tao tao parts it is www.buyatvsonline.com they seem to have just about every part you could need for these 4-wheelers.I am new to this site and new to tao tao 4-wheelers,I have always had 4-wheelers growing up but now i am 35 and have 6 kids so i can't afford name brand and i want my kids to have the same experience as i did growing up.I just bought my 7 year old son a tao tao 110cc 4-wheeler and with about 30 hours on it so far i have had no problems.I checked over it thouroughly when i first got it tightening bolts checking wiring changing the oil etc. and he is only 7 and does not ride it hard at all so i am hoping to get good service out of it til he gets more "crazy" and then we will see about a used name brand.I am a forklift mechanic and pretty mechanicly inclined so hopefuly i can keep this thing going.And i know it is not a name brand but growing up with a name brand "many" i seem to remember working on them a bit too just to keep them going so nothing is bullet proof and maybe with a little preventive maintenance and taking care of it he will get some time from it!!(I HOPE!!!)  

WHATS UP? DOES ANYONE KNOW WHERE I CAN FIND A SHOP REPAIR MANUAL FOR THE LONCIN 110CC 3 VALVE ENGINE? HAVING SOME PROBLEMS AND NEED A MANUAL TO SORT THEM OUT. THANKS