|
|
Item Posts
Sort Order
|
|
|
blowen ignition fuse
|
amc123
New User
| Posts: 2
| Joined: 05/08
Posted: 05/25/08
04:18 PM
|
|
have 02 500TBX 4x4 auto that blows the ignition fuse when the switch is turned on and before the starter button ia pushed
|
|
|
|
Buzz720
New User
| Posts: 1
| Joined: 06/08
Posted: 06/01/08
11:53 AM
|
|
Possible a short somewhere. My '07 500 does the same so I'm taking down to the dealer.
|
|
|
|
amc123
New User
| Posts: 2
| Joined: 05/08
Posted: 06/25/08
07:39 AM
|
|
buz did dealer find a short. if so where was it
|
|
|
|
|
|
taz1
New User
| Posts: 3
| Joined: 06/09
Posted: 06/14/09
09:21 PM
|
|
Yah I have a 07 Artic Cat SE and I had the same problem. Whe located the short in the wirring under the guage which runs down the stearing. Mine happened after I had hand warmers installed. The wire for the main for the main power wire was cut by through by the metal that the wire ran through. I think it was part of the frame. I had Arctic dealer shrink tube the wire and put two plastice wire looms over top of the wires. It is a whole cluster of wire which run through there.
Hope this helps
taz
|
|
|
|
merwin10
New User
| Posts: 7
| Joined: 07/09
Posted: 07/09/09
01:13 PM
|
|
Hi -
Guarantee you have a shorted harness! Look anywhere the wiring harness comes in contact with the chassis. Steering loom is the most obvious place lots of movement there and the space is tight!
Mike -
|
|
|
|
|
|
|